43 US-EN
It is important that you consult your doctor at regular intervals.
Your doctor will give you your particular values for normal
blood pressure as well as the value for when your blood
pressure is classified as dangerous.
The bar chart on the display and the scale on the device
state which range the blood pressure measured is in.
If the values for systolic and diastolic pressure are in two
different JNC ranges (e.g. systolic in the Stage 1 Hyperten-
sion range and diastolic pressure in the normal range) the
graphic JNC classification on the unit indicates the higher
range (Stage 1 Hypertension in the example described).
Saving, requesting and deleting
measurements
The results of each successful measurement are saved together
with the date and time. If there are over 30 measurement
values, the oldest measurement value will be overwritten.
Press the SET button
6
. Press the function buttons -/+
7
to select the desired user memory ... . Confirm
your choice using the START / STOP button
8
.
Press the memory button M
5
to display the average
value “A” of all saved measurements pertaining to the
user memory. Press the memory button M
5
again to
display the average value of the last 7 days for the
morning measurement. (Morning: 5.00 am – 9.00 am,
display “AM”). Press the memory button M
5
again
to display the average value of the last 7 days for the
evening measurement. (Evening: 6 pm – 8 pm, display
870_silv_Blutdruckmessgeraet_Content_US.indd 43 04.07.19 09:1
To Next Page
Loading...
