SGB 1200 B5
GB
│
IE
│
NI
│
CY
│
7 ■
■ To remove the hot rack 8, hook the tongs 0
onto it as follows:
Fig. 1: Hooking the tongs 0 onto the rack 8
Using the baking tray
WARNING! RISK OF INJURY!
► Always use the tongs 0 to insert the baking
tray 9 into the appliance or to remove it.
Fig. 2: Hooking the tongs 0 onto the baking tray 9
■ Push the baking tray 9 onto one of the 2 rails 1
in the cooking chamber of the appliance.
CAUTION! MATERIAL DAMAGE!
► Never place the baking tray 9 directly onto
the heating elements.
► Do not use this baking tray 9 for storage
and processing of acidic, alkaline or salty
food.
Before initial use
Once the appliance is set up correctly:
1) Insert the plug into a mains power socket.
2) Turn the temperature control 2 clockwise to
the maximum temperature (to the limit stop).
3) Turn the function switch 4 to “top and bottom
heat”
.
4) Open the glass door and leave it open for this
operation.
5) Remove any installed accessories from the
cooking chamber.
6) Turn the timer 6 to 20 minutes.
NOTE
► The first time the appliance heats up, a
small amount of smoke and odour may be
generated due to production-related residue.
This is normal and is completely harmless.
Provide sufficient ventilation; for example, by
opening a window.
The appliance switches off automatically
after 20 minutes.
If you want to interrupt the heating process
prematurely, turn the temperature control 2
counter-clockwise to the limit stop and set
the function switch 4 to
OFF
and set the
timer 6 to “OFF”.
7) Allow the appliance to cool down, then clean
the appliance as described in the section
“Cleaning and care”.
The appliance is now ready for use.
IB_373136_SGB1200B5_GB-IE-NI-CY.indb 7 04.08.2021 13:15:23
To Next Page
Loading...
