EasyManua.ls Logo

Silvercrest 373136 2104 - Operating the Appliance; Function Switch; Temperature Control; Timer

Silvercrest 373136 2104
51 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
SGB 1200 B5
8 
GB
IE
NI
CY
Operating the appliance
Function switch
You can switch on the appliance using the function
switch 4, and can also set three different functions:
Symbol Meaning
"Top heat"
e.g. for grilling
"Bottom heat"
e.g. for baking cakes
"Top & bottom heat"
e.g. for baking pizza
OFF
"OFF"
The appliance is switched off.
Temperature control
Use the temperature control 2 to set the
desired temperature.
Timer
User the timer 6 to set the cooking time.
Set the timer 6 to the desired cooking time.
The red control lamp 5 lights up. Once the set
time has elapsed, you will hear a beep and
the appliance stops heating. The red control
lamp5 goes out.
NOTE
You can also use the timer 6 as a short-period
timer without the heating function.
Set the function switch 4 to
OFF
.
Set the desired time on the timer 6.
The switch of the timer 6 now rotates
anticlockwise to "OFF". A beep sounds when the
set time has elapsed. The appliance does not
heat up.
Grilling and baking
CAUTION! MATERIAL DAMAGE!
Never place any containers or food directly
onto the floor of the appliance, the heating
elements or the crumb tray 7.
1) Place the crumb tray 7 in the appliance.
2) Remove the rack 8 and baking tray 9 from
the appliance. If required, cover these with
baking paper or grease the baking tray 9
with fat/oil that is suitable for baking.
NOTE
The oven must be pre-heated appropriate
to each dish. Refer to the guidelines in the
respective recipe. Pre-heating is useful for:
very short baking times,
crisp crusts,
delicate dishes that require a constant
temperature, such as soufflés.
If no pre-heating is required, skip step 3.
3) Allow the appliance to heat up to the desired
temperature:
Close the glass door.
Select the required temperature using the
temperature control 2.
Select the required function with the function
switch 4.
Use the timer 6 to set a preheating time of
at least 15 minutes.
The red control lamp 5 indicates that the appliance
is switched on. The switch of the timer 6 now
rotates anticlockwise to the “OFF” position.
IB_373136_SGB1200B5_GB-IE-NI-CY.indb 8 04.08.2021 13:15:23

Table of Contents

Related product manuals