Silvercrest 389910-2201 - Handling and Operation; Initial Use; Switching the Appliance On;Off and Setting the Lighting

■ 12
│
GB
│
IE SASL 12 A1
Handling and operation
Initial use
IMPORTANT
► It is possible that oil drops may cause damage to furniture
surfaces. If necessary, place a cloth under the appliance.
♦ Place the appliance on a stable and level surface.
♦ Place the salt crystalz onto the mounting9 so that the line
on the bottom of the salt crystal points to the
symbol on the
base8. Turn the salt crystalz clockwise slightly until the line
points to the symbol.
♦ Remove the attachment1 from the base8.
♦ Fill the water tank3 with a maximum of 100 ml of clean tap
water using the measuring cupt provided. Note the maximum
filling levelw, which is marked by a border.
♦ Add 2–4 drops of the desired oil to the water.
♦ Afterwards, place the attachment1 back on the water tank3.
♦ Connect the mains adapterr to the power socket.
Switching the appliance on/off and setting
the lighting
♦ Press the button7 to switch on the appliance. The aromatic
mist production starts and the lighting is switched on.
♦ Press the button6 repeatedly to select the desired brightness
or to switch off the lighting.
♦ If the appliance is switched on, press the
button7 to switch
it off immediately. Aromatic mist production and the lighting will
be switched off.