70 GB/MT
Problem Possible cause Solution
The product
is not cooling
sufficiently.
Doors and windows are
not closed properly.
Close doors and windows.
There are heat sources in
the room.
Remove all heat sources
if possible.
The hot air outlet hose
13
is
not connected or blocked.
Connect the hot air outlet
hose
13
or clean it.
The temperature setting is
too high.
Adjust the temperature
setting.
The air inlets
5
,
9
are
blocked.
Clean the air inlets
5
,
9
.
The product
is very loud.
The product is standing on
uneven ground.
Place the product on as
level and flat a surface
as possible.
Error code E0 The room temperature
sensor is defective.
Contact customer service.
Error code E2 The water tank is full. Empty the water tank.
Cleaning and care
RISK OF ELECTRIC SHOCK!
Improper handling of the product
may result in electric shock.
Always switch the product off
and unplug the mains plug
10
from the socket before cleaning
the product.
ATTENTION! RISK OF
SHORT CIRCUIT! Water or
other liquids inside the housing
may cause a short circuit.
Never immerse the product in
water or other liquids.
Do not allow water or other
liquids to enter the housing.
ATTENTION! RISK OF
DAMAGE! Improper use of the
product may result in damage to
the product.
Do not use aggressive cleaning
agents, brushes with metal or
nylon bristles, or sharp or metal
objects such as knifes, hard spat-
ulas, etc. These can damage the
surfaces.
To Next Page
Loading...
