EasyManua.ls Logo

Silvercrest 9000 BTU WIFI A1 - User Manual

Silvercrest 9000 BTU WIFI A1
224 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
GB/IE/NI/CY/MT 5
1. Introduction   6
1.1 Intended use   6
1.2 Scope of delivery   6
1.3 Equipment   6
1.4 Technical data   7
2. Safety Instructions   8
2.1 Information about batteries   13
3. Before starting up   15
3.1 Setting up the unit   15
3.2 Mounting the hot air outlet hose   15
3.3 Installation of the window seal   15
4. Start-up   15
4.1 Select mode   15
4.1.1 Cooling mode   15
4.1.2 Dehumidification mode   16
4.1.3 Ventilation mode   16
4.1.4 Sleep mode    16
4.2 Timer setting   16
4.3 Adjust air flow   17
4.4 Oscillation function   17
4.5 Range of use of the remote control   17
4.6 Control the device with the app   18
4.7 WLAN pairing with the device   18
4.8 Decoupling the device   18
4.9 Empty water tank   18
4.9.1 Use permanent water drainage   19
5. Protective function   19
5.1 Overflow protection function    19
5.2 Protective function of the compressor   19
6. Troubleshooting   20
7. Maintenance, cleaning and storage   21
7.1 Clean air filter   21
8. Disposal   21
9. Data protection/Internet security   22
10. EU Declaration of Conformity    22
11. ROWI Germany GmbH Warranty   23
12. Service   24

Questions and Answers

  • J
    Jennifer MannAug 8, 2025
    Why Silvercrest Air Conditioner does not work?
    • A
      Alison JonesAug 8, 2025
      Your Silvercrest Air Conditioner might not be working due to several reasons: * The mains plug may not be properly inserted or the fuse might be broken. Ensure the plug is correctly inserted and replace the fuse if needed. Also, verify the mains voltage. * The water tank could be full, so you should empty it. * The ambient temperature might be too high or too low. The recommended usage temperature is between 7 to 35 °C (44 to 95 °F). * If in cooling mode, the room temperature might be lower than the set temperature. Try adjusting the set temperature. * The air intake or outlet could be blocked. Clear any blockages.
  • L
    lcrawfordAug 13, 2025
    What to do if Silvercrest 9000 BTU WIFI A1 Air Conditioner does not cool sufficiently?
    • C
      Christopher MccarthyAug 13, 2025
      If your Silvercrest Air Conditioner isn't cooling enough, consider these possible causes and solutions: * Ensure that doors and windows are properly closed. * Check that the hot air outlet hose is connected and not blocked. Connect or clean the hose if necessary. * The temperature setting may be too high; adjust it to a cooler setting. * The air filter may be dirty. Clean or replace the air filter.
  • W
    Wanda YuAug 19, 2025
    What to do if my Silvercrest 9000 BTU WIFI A1 Air Conditioner remote control does not work?
    • S
      Steven HarrisonAug 19, 2025
      If the remote control for your Silvercrest Air Conditioner isn't working, try the following: * Make sure you are close enough to the air conditioner and that the remote is pointed directly at the receiver. * The batteries might be empty; replace them with new ones.
  • A
    Austin JenkinsAug 25, 2025
    Why Silvercrest 9000 BTU WIFI A1 compressor does not work?
    • A
      Angela WilliamsonAug 26, 2025
      If the compressor in your Silvercrest Air Conditioner isn't working, it might be due to the overheating protection being activated. Wait for about 3 minutes until the temperature drops, and then restart the appliance.
  • K
    Kevin ClayAug 31, 2025
    Why is my Silvercrest Air Conditioner so loud?
    • N
      Nathan SmithAug 31, 2025
      If your Silvercrest Air Conditioner is very loud, it might not be placed on a flat surface. Ensure that the unit is placed on a flat and hard surface.

Summary

1. Introduction

1.1 Intended use

Defines the product's purpose and limitations for user guidance.

1.2 Scope of delivery

Lists all items included in the product package for verification.

1.3 Equipment

Details the physical components and features of the device.

1. Introduction

1.4 Technical data

Provides specifications, ratings, and performance metrics of the appliance.

2. Safety Instructions

2.1 Information about batteries

Details safe handling, use, and disposal of batteries to prevent hazards.

3. Before starting up

3.1 Setting up the unit

Instructions for proper placement and installation site preparation for safe operation.

3.2 Mounting the hot air outlet hose

Guidance on connecting the exhaust hose to the unit for proper ventilation.

3.3 Installation of the window seal

Steps for fitting the window seal for efficient air exhaust.

4. Start-up

4.1 Select mode

Explains how to choose between cooling, dehumidification, and ventilation modes.

4.2 Timer setting

How to set an automatic switch-off timer for the unit.

4.3 Adjust air flow

Manual adjustment of airflow direction via vents for comfort.

4.4 Oscillation function

How to activate and use the automatic swing function for air distribution.

4.5 Range of use of the remote control

Guidelines for optimal remote control operation and effective range.

4.6 Control the device with the app

Instructions for connecting and operating the unit via a mobile app.

4.7 WLAN pairing with the device

Steps to connect the unit to a Wi-Fi network for smart control.

4.8 Decoupling the device

Procedure for unpairing the device from the app or network.

4.9 Empty water tank

Instructions for draining accumulated water from the tank.

4. Start-up

4.9.1 Use permanent water drainage

Method for continuous water drainage during dehumidification mode.

5. Protective function

5.1 Overflow protection function

Explains the warning system when the water tank reaches capacity.

5.2 Protective function of the compressor

Details the compressor's start delay to ensure longevity.

6. Troubleshooting

7. Maintenance, cleaning and storage

7.1 Clean air filter

Step-by-step guide for cleaning and maintaining the air filter.

8. Disposal

9. Data protection;Internet security

10. EU Declaration of Conformity CE

11. ROWI Germany GmbH Warranty

12. Service

Silvercrest 9000 BTU WIFI A1 Specifications

General IconGeneral
Cooling Capacity9000 BTU
Wi-Fi CapabilityYes
Energy Efficiency ClassA
Room Size Coverageup to 25 m²
RefrigerantR290
Power Supply220-240 V, 50 Hz
Operating ModesCooling, Fan
Noise Level65 dB

Related product manuals