To Next PageTo Next PageWhy is my Silvercrest Air Conditioner not cooling sufficiently?
Your Silvercrest Air Conditioner might not be cooling well due to several reasons. Check if doors and windows are properly closed, remove any heat sources from the room, ensure the hot air outlet hose is connected and not blocked, adjust the temperature setting if it's too high, and clean the air inlets if they are blocked.
What to do if my Silvercrest 9000 BTU won't start?
If your Silvercrest Air Conditioner isn't starting, first empty the water tank if it's full. Also, check if the room temperature is lower than the set temperature in cooling mode; if it is, adjust the temperature setting accordingly.
What does error code E2 mean on my Silvercrest 9000 BTU Air Conditioner and how to fix it?
Error code E2 on your Silvercrest Air Conditioner indicates that the water tank is full. Empty the water tank to resolve this issue.
What does error code E0 mean on my Silvercrest Air Conditioner?
Error code E0 indicates that the room temperature sensor is defective. Contact customer service for assistance.
General| Brand | Silvercrest |
|---|---|
| Model | 9000 BTU |
| Category | Air Conditioner |
| Language | English |
Covers general safety guidelines, electrical safety, and specific warnings for battery handling.
Guides on checking contents, setting up the unit, installing remote batteries, and initial usage modes.
Instructions to prevent electric shock, including proper connections and handling of the mains cable and plug.
Guidelines on product handling, cleaning, repairs, and avoiding electrical hazards during use.
Precautions related to the product heating up, the presence of flammable gas, and avoiding fire risks.
Advice to prevent injuries, such as avoiding contact with hot parts and keeping children away from inlets.
Warnings about the flammability and health risks associated with the R290 refrigerant gas.
Guidelines for safe storage, ventilation, and environmentally friendly disposal of the product and its components.
Warnings about the severe health risks and potential fatality if batteries are ingested by children.
Identifies common problems like the product not starting or cooling sufficiently, and provides solutions.
