GB/IE/NI/CY/MT 17
4.3 Adjust air flow
You can adjust the airflow manually by moving the
vents
3
at the front air outlet
4
up or down.
4.4 Oscillation function
Press the SWING button
25
when the unit
is switched on to switch the oscillation of the
unit on or off. If it is activated successfully, the
control lamp lights up. The oscillation function
causes the discharged air to be distributed from
left to right.
4.5 Range of use of the remote control
When controlling with the remote control, please be
sure to observe the range of use of the device shown
below. To ensure that the unit responds to a button
press on the remote control, make sure that the re-
mote control is within the range of use shown when a
button is pressed. Depending on the distance to the
unit, the angle of use and radius change, resulting
in the respective area of use. The most favourable
positioning of the remote control in relation to the
unit is in the centre at the height of the display
2
.
Note: If there are objects, walls or other obstacles
between the unit and the remote control, the control
of the unit with the remote control may be obstructed.
1
To Next Page
Loading...
