■ 8
│
GB
│
IE
SAS 7.4 LI D3
Prior to first use
1) Remove all packaging materials from the appliance.
2) Press the dust filter bag
9 and the dust filter 0 a little way into the dirt
container
q. They might have loosened during transport and thus not be
positioned correctly inside the dirt container q.
3) Place the dirt container
q on the motor unit:
– Push the plastic tab on the underside of the handheld vacuum cleaner
into the recess on the dirt container
q.
– Press the release button 8 and push the dirt container q onto the motor
unit at the same time.
– Let go of the release button 8 so that the restraint engages in the
recess. The dirt container
q is now firmly seated on the motor unit.
Information about the batteries
■ This handheld vacuum cleaner is powered by rechargeable lithium-ion batteries.
The batteries must be charged for around 5 hours before using the handheld
vacuum cleaner for the first time.
■ For care of the batteries, we recommend the following: Once the batteries have
been charged, disconnect the mains adapter
4 from the mains socket. Do not
plug the mains adapter 4 back into the mains socket until the vacuuming perfor-
mance drops noticeably and the charge indicator lamp 7 flashes green.
■ When the batteries are completely discharged, the appliance switches off
and the charge indicator lamp
7 flashes green/red alternately for approx.
60 seconds. Start charging the appliance.
NOTE
► The appliance is equipped with a temperature monitor to protect the batter-
ies. At high ambient temperatures (in rare cases) the charging process may
be interrupted or the appliance may switch off automatically:
– The charging process is interrupted and resumes automatically as soon
as the temperature of the appliance has dropped.
– The appliance switches off automatically and the charge indicator lamp
7
flashes green and red alternately for one minute. Allow the appliance to
cool for 20–30 minutes before switching it on again.
To Next Page
Loading...
