22 GB
Operation
Do not use the appliance immediately after cleaning
the measuring head
2
. The evaporative cooling eff ect
of the detergent may falsify the measuring result.
Sample applications:
- The temperature of milk in baby bottles
- The temperature of bathwater
1. If the sleep mode has been activated, activate the
thermometer again by pressing any button before
taking a measurement.
2. Carefully press on the protective cap
9
and remove
it with a gentle rotary motion and without using any
force.
3. Make sure that the measuring head
2
and the
measuring sensor are clean.
4. Press the “FOREHEAD” button
4
and the “EAR”
button
3
repeatedly at the same time until “Food”
is shown in the LC display
5
(Illustration E).
5. Hold the measuring head at a distance of 1 cm from
the liquid and / or surface whose temperature you
want to measure.
6. Press the “EAR” button
3
to start the measurement.
7. Now you can read off the measurement result on the
LC display
5
(Illustration E).
8. Values can be displayed in °C as well as in °F
(see “Functions / error analysis - selecting the
temperature unit”).
IB_86673_SSOT6A1_LB4.indd 22IB_86673_SSOT6A1_LB4.indd 22 21.11.12 09:5321.11.12 09:53
To Next Page
Loading...
