Silvercrest H14271 - Weigh and add; Remove part of the weighed food; Set the countdown timer;alarm; Display ambient temperature

8 GB/IE
Getting started
Q
Weigh and add
The kitchen scale
2
allows you to weigh foods
consecutively without removing food already in the
weighing bowl
1
.
j Place the weighing bowl
1
on the kitchen
scale
2
.
j Press the ON/OFF button
3
to switch the
kitchen scale
2
on.
j Select the unit of weight by pressing the Unit
button
6
. You can choose between “g/kg“
and “oz/lb“.
j Place the food you wish to weigh in the bowl.
j The LCD readout
5
indicates the weight of the
food in the selected unit of weight.
j Now press the zero button
7
. The scale now
reads “TARE“.
j Now place more food in the weighing bowl
1
.
j The LCD readout
5
indicates the weight of the
food you have added in the selected unit of weight.
j Continue in this way only until the maximum
capacity of the kitchen scale
2
is reached or
the weighing bowl
1
is full.
Q
Remove part of the weighed
food
j Place the weighing bowl
1
on the kitchen
scale
2
.
j Press the ON/OFF button
3
to switch the
kitchen scale
2
on.
j
Select the unit of weight by pressing the Unit button
6
. You can choose between “ g/kg“ and “ oz/
lb“.
j Place the food you wish to weigh in the bowl.
j The LCD readout
5
indicates the weight of the
food in the selected unit of weight.
j Now press the Zero button
7
.
j Now remove the required amount of food from
the weighing bowl
1
.
j The LCD readout
5
indicates the weight of the
food you have removed as a negative number.
Q
Set the countdown timer/alarm
The timer on the kitchen scale has a time span of 0
to 99.50 minutes. The set time is counted down in
reverse to “0“. An alarm signal then sounds and
the alarm display “
“
15
flashes.
j Press the ON/OFF button
3
to switch the
kitchen scale
2
on.
j Press the Timer button
4
.
j Set the required time by pressing the Timer button
“
“
6
, or the Timer button “ “
7
.
j Press the Timer button
4
again to confirm the
set time and to start the countdown timer.
j Press the Timer button
4
again to stop the
countdown timer.
j Press the Timer button
4
again to reset the set
time to “0“.
NOTE: When the set time has elapsed, an
alarm signal sounds.
j
Press the ON/OFF button
3
to stop the alarm and
at the same time switch off the kitchen scale
2
.
Q
Display ambient temperature
When the kitchen scale
2
is switched on, the LCD
readout
5
shows the current ambient temperature.
This is indicated by the temperature display
12
in °C.
Q
Switch off the kitchen scale
The kitchen scale
2
switches itself off automatically
after 90 seconds of inactivity to save energy.
j Press the ON/OFF button
3
to switch the
kitchen scale
2
off manually.