125 GB/MT
thermometer must be placed in the room at least 30 minutes before
the measurement is carried out.
Ensure before every measurement that the device is in the mode
which you want to use to take a measurement.
Mode
Ear Forehead Object Key tone
activated
Display
Measuring body temperature
from the forehead
Note: Please note that the forehead / temples must be free from sweat
and cosmetics, and that taking vasoconstrictive medication and skin ir-
ritation can falsify the measurement result for the forehead measurement.
To switch on the multi-function thermometer, press the ON /
OFF/ MEASURE button
8
for one second.
Place the measuring head directly
against your temple with the forehead /
cover cap
2
attached.
Hold the lateral measurement
button
3
pressed and guide the
multi-function thermometer steadily over your forehead to the other
temple.
Then, release the lateral measurement
button
3
. The measured value appears
on the display and the end of measurement
is indicated with a short beep (when the
key tone is activated). The next measure
ment is possible after approx. 5 seconds.
To Next Page
Loading...
