EasyManua.ls Logo

Silvercrest KH 1115 - Product Overview and Setup; Items Supplied; Appliance Description; Technical Data

Silvercrest KH 1115
49 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
- 3 -
To avoid damage to the appliance!
Fill the water tank of the appliance exclusively
with freshly drawn mains water.
Items supplied
Coffee Maker KH 1115
Thermal jug with lid
Measuring spoon
Operating Instructions
Before taking the appliance into use check to ensure
that all of the items listed have been supplied and
that there are no visible signs of damage.
Correct usage
The coffee maker is intended exclusively for brewing
coffee. This coffee maker is intended exclusively for
use in private households. Do not use it commercially.
Appliance description
1 Water tank
2 Measuring spoon holder
3 Scale
4 Filter holder
5 Cable shaft
6 Power cable with power plug
7 Switch with integrated indicator lamp
8 Pouring lever
9 Lid
0 Thermal jug
q Measuring spoon
Technical data
Mains voltage: 220 - 240 V
~
50 Hz
Power consumption: 1000 W
Coffee filter bags: Size 1x 4
Before the First Use
Before the first use, pass a volume equal to 8 large
cups of water through the appliance twice. Do not
insert a filter bag and do not use any coffee powder.
Clean the appliance (see chapter "Cleaning and
care").
Placement
Position the coffee maker on a dry and level
surface.
Connect the plug 6 with a wall power socket.
Ensure that the plug 6 is easily accessible in
an emergency.
Note:
Should the coffee maker, after its connection with
the power source, be found to be switched on, wait
for ca. 45 seconds. It will switch itself off.
Hang the measuring spoon q from the measuring
spoon holder 2. It will then always be at hand.
IB_KH1115_RP25671_LB3 19.02.2009 9:47 Uhr Seite 3

Table of Contents

Related product manuals