Silvercrest SEMS 1100 B2 User Manual (English)

Questions and Answers:

O
owrightAug 2, 2025
Why is my Silvercrest Coffee Maker espresso no longer flowing out?
- J
  Justin LeonardAug 2, 2025
  There are several reasons why the espresso might not be flowing. It could be due to the espresso powder being too moist or compressed too tightly; in this case, re-prepare the espresso without compressing the powder as firmly, and if necessary, use new powder. Another reason could be that there is no water in the water tank; simply fill the water tank with water. Finally, the holes of the sieve holder openings could be blocked, so you should clean the sieve holder.
J
Jessica OlsonAug 7, 2025
What to do if my Silvercrest Coffee Maker espresso is cold?
- A
  Allison ClarkAug 7, 2025
  If your espresso is coming out cold, it could be due to a few reasons. First, the appliance may not have been preheated, so preheat the appliance. Another reason could be that the green heating-up control lamp has not yet glowed; wait until the green heating-up control lamp lights up. Lastly, the cups may not have been pre-warmed, so pre-warm the cups before pouring your espresso.
D
daniel74Aug 11, 2025
What to do if Silvercrest SEMS 1100 B2 Coffee Maker espresso drips over the edges?
- E
  Eric MartinezAug 11, 2025
  If the espresso drips over the edges of the sieve holder instead of from the openings, it could be that the sieve holder is not correctly inserted; in this case, insert the sieve holder correctly. Another possibility is that the sieve holder openings are blocked, so clean the sieve holder. Lastly, there might be espresso powder residues on the edges of the sieve holder, so clean the espresso powder residues from the edges of the sieve holder.
H
hericksonAug 15, 2025
Why is my Silvercrest SEMS 1100 B2 Coffee Maker pump unusually noisy?
- M
  Michael LopezAug 15, 2025
  An unusually noisy pump may indicate that the water tank is empty. Fill the water tank with water to resolve this issue.
S
Shane Nelson DDSAug 20, 2025
Why is the crema too light on my Silvercrest SEMS 1100 B2 Coffee Maker espresso?
- S
  Stephen MurrayAug 20, 2025
  If the crema is too light and the espresso runs out of the sieve holder quickly, it could be due to not enough espresso powder, so use more espresso powder. Alternatively, the espresso powder may be too coarsely ground; use only espresso powder specially manufactured for espresso.
A
andrea36Aug 25, 2025
Why is the crema too dark on my Silvercrest SEMS 1100 B2 Coffee Maker espresso?
- B
  bradfordrandallAug 25, 2025
  If the crema is too dark and the espresso runs out of the sieve carrier slowly, it could be due to too much espresso powder, so use less espresso powder. Another reason could be that the powder is too finely ground or moist; use only espresso powder specially manufactured for espresso. It could also be that the sieve is blocked, so clean the sieve.
J
julie55Aug 28, 2025
How to fix milk not frothing in Silvercrest SEMS 1100 B2 Coffee Maker?
- L
  Lisa ScottAug 28, 2025
  If the milk does not froth, it could be because the milk is not cold enough; use milk from the refrigerator. Alternatively, the milk frother might be dirty; clean the milk frother.