How to fix light crema on my Silvercrest SEMM 1470 A2 Coffee Maker?
If the crema is too light and the espresso runs out of the sieve holder quickly in your Silvercrest Coffee Maker, you might not be using enough espresso powder, so use more espresso powder. Alternatively, the espresso powder might be too coarsely ground; use only espresso powder that is specially produced for making espresso.
What to do if crema is too dark with Silvercrest Coffee Maker?
If the crema is too dark and the espresso runs out of the sieve carrier slowly in your Silvercrest Coffee Maker, you might be using too much espresso powder, so use less espresso powder. Another possibility is that the powder is too finely ground; use only espresso powder that is specially produced for making espresso.
What to do if the espresso no longer flows out of my Silvercrest SEMM 1470 A2?
If the espresso no longer flows out of your Silvercrest Coffee Maker, it might be due to several reasons. First, the espresso powder could be too moist or compressed too tightly; in this case, re-prepare the espresso, ensuring it's not compressed too much, or replace the powder entirely. Another reason could be that the water tank is empty; simply fill it with water. Finally, the holes of the sieve holder openings might be blocked; try cleaning the sieve holder.
Why is the milk not being frothed in my Silvercrest SEMM 1470 A2 Coffee Maker?
If the milk is not being frothed by your Silvercrest Coffee Maker, check the "Steam quantity" dial. If it points to or past the " " symbol, it's in cleaning mode; turn the dial further to the left, in front of the " " symbol. Also, the milk tank lid and/or the milk nozzle might be blocked. Clean the milk tank lid and/or milk nozzle.
Why does espresso drip over the edges of the sieve holder on my Silvercrest Coffee Maker?
If the espresso drips over the edges of the sieve holder instead of from the openings in your Silvercrest Coffee Maker, it could be due to a few issues. Make sure the sieve holder is correctly inserted. Also, the sieve holder openings might be blocked, so try cleaning it. Espresso powder residues on the edges of the sieve holder can also cause this problem, so clean any residues from the edges.
Why is the pump so noisy on my Silvercrest Coffee Maker?
If the pump of your Silvercrest Coffee Maker is unusually noisy, the water tank might be empty. Fill the water tank with water.
Information regarding copyright protection of the documentation.
Details on the manufacturer's liability limitations.
Explains warning symbols and hazard levels for safety.
Details the intended use and scope of the appliance.
Lists standard components and guides initial package inspection.
Guidance on environmentally friendly disposal of packaging materials.
Step-by-step instructions for filling the water tank.
Step-by-step instructions for filling the milk tank.
Guidance on choosing cups based on beverage volume.
How to correctly insert espresso sieves into the sieve holder.
Procedure for inserting the filled sieve holder into the appliance.
Customizing espresso volume for specific buttons.
Detailed instructions for cleaning milk components.
Steps for cleaning the water tank.
How to clean the exterior surfaces of the appliance.
Instructions for cleaning removable parts.
Procedures for cleaning coffee brewing parts.
Guidelines for environmentally responsible product disposal.
Steps to follow when making a warranty claim.
Contact details for service and importer information.
General| Brand | Silvercrest |
|---|---|
| Model | SEMM 1470 A2 |
| Category | Coffee Maker |
| Language | English |
To Next Page