GB
│
MT
│
33 ■SEMS 1100 B2
Temperature display
The temperature indicator 1 indicates how far the appliance has heated up.
As soon as you switch the appliance on, it starts heating up until the pointer is
approximately in the middle between 80°C and “ ”.
When the pointer reaches the red portion of the scale, the temperature is high
enough to prepare an espresso. The green heating-up control lamp
e
lights up.
If you press the “Steam” button
z the green heating-up control lamp
e
goes out, and the appliance continues heating up until it reaches the range on
the scale between “
” and “ ”.
Once the pointer reaches the range between “
” and “ ”, the temperature
is high enough to produce steam. The green steam control lamp
q lights up.
First use
1) Clean the sieve holder i, the measuring spoon a, the espresso sieve o p,
the drip grille 9 and the water tank 5 as described in the section “Cleaning
and Care”.
2) Place the appliance on a level and heat-resistant surface. Ensure that a mains
power socket is in the vicinity.
3) Insert the drip grille 9 so that the red float 8 can protrude through the hole
in the drip grille 9.
4) Place the sieve holder i in the appliance by inserting the “
INSERT”
mark, which is located next to the hot water shower 0, into the appliance and
then turning it clockwise until the handle of the sieve holder i is facing the
front (“
LOCK” mark).
To Next Page
Loading...
