• When the MEMORY SCAN button is pressed again you leave the count-
down mode.
Call up and activate the countdown function
• Press and hold down the MEMORY SCAN button for around 2 seconds, the
screen shows D 00. 00.
• Select the desired, saved countdown time with the aid of the
M.0/5–
M.4/9 memory buttons.
• Press
SNOOZE to start the countdown. Pressing the SNOOZE button again
pauses the countdown.
When the set time has been counted down, an alarm sound plays for one
minute becoming gradually higher in tone and louder.
• Press the
MEMORY SCAN button to pause the countdown and leave count-
down mode.
Radio operation
Switching on/volume control
• Press the POWER button to switch the radio on. ON will appear briefly on
the screen, followed by the current frequency and band selection.
• Press the
VOL.+/AL–1 or VOL.–/AL–2 button to control the volume:
Button
VOL.–/AL–2: quieter;
Button
VOL.+/AL-1: louder.
The volume is shown on the bar indicator to the bottom right of the screen.
Switch on bass amplifier
• When the radio is switched on, press the BASS button to switch on the
bass amplifier. The screen will flash BASS.
- 19 -
IB_KH2030_DT25841_LB3A_C 12.01.2009 16:50 Uhr Seite 19
To Next Page
Loading...
