Selecting a saved station
• In order to select a saved station directly, first use the frequency se-
lection switch to select the frequency range where the station is saved.
• Press the
PAGE button and then use the UP or DOWN buttons to select a
memory page (from 00–39).
• Within 10 seconds press the
M.0/5–M.4/9 buttons to select a memory
space to store the station.
The station is played immediately after entering the memory space.
Carry out automatic station search
Your world receiver can search the frequencies within a range and store
the stations it finds. Do the following to activate the automatic search (auto-
matic memory scan/AMS):
• Press the
MEM button once. The MEM message flashes.
• Hold down the
MEMORY SCAN button for about 1 second.
The world receiver now searches all frequencies in the currently selected
frequency range and saves the stations it finds from the currently set memo-
ry page and memory space.
Displaying memory spaces
• Press the MEMORY SCAN button to call up the content of all station memo-
ries for the selected band.
All stored stations will be played in succession for about five seconds.
• Press the button
SNOOZE to finish the rendering of the memory positions.
- 23 -
IB_KH2030_DT25841_LB3A_C 12.01.2009 16:50 Uhr Seite 23
To Next Page
Loading...
