Silvercrest KH 2190 - Setting up and Connecting; Package Contents and Transport Inspection; Set-Up Location Requirements

9
KH 2190
GB
IE
Setting up and connecting
Setting up and connecting
Package contents and transport inspection
The appliance is delivered with the following components as
standard:
Clock Radio ●
Operating instructions ●
Extract the appliance and the instruction manual from the carton
and r
emove all packaging material.
NOTE
Check the contents to ensure everything is present and there ►
are no signs of visible damage.
If the contents ar
e not complete or are damaged as a result ►
of defective packaging or through transportation, contact the
Service Hotline (see chapter Service).
Set-up location requirements
For safe and fault free operation of the appliance the set-up
location must comply with the following provisions:
Place the appliance on a fi rm, fl at and even surface . ■
Place the appliance so that the ventilation slots are not covered. ■
Do not place the appliance in a hot, wet or very humid location ■
or in the vicinity of fl ammable materials.