Placing
• Place the projection clock onto a level surface.
• Position the projection clock such that the projection lens
q
is directed onto
an empty surface. The distance from the projection lens to the projection
area (ceiling or wall) must lie between 0,4 m and 3 m.
Operation
Connect the external mains adaptor
This device can be operated with an external mains adaptor.
Please use only mains adaptors that meet these specifications:
Input voltage: 230 V
~
50 Hz
Output voltage: DC 3V (+/- 5%)
Rated current: min. 300 mA
Polarity:
Attention:
Make certain that the polarity is correct – both for the batteries as well as
for the mains adaptor. Take note of the markings on the 3V direct current
connection
a
.
False polarity will damage the device.
- 10 -
To Next Page
Loading...