Radio alarm call
When the clock is set correctly, as described above:
1. Adjust the tuning regulator
d
to select the desired radio station.
2. Using the sound volume controller OFF/BUZZ/VOLUME
o
now set the
desired sound volume level.
3. To activate an alarm call with radio, place the switch ALARM ON/OFF/
AUTO
e
at "AUTO". The symbol for the alarm function and "Zz"
appear in the display
i
.
At the programmed time the radio switches itself on. If you do not touch any
other buttons while the alarm is sounding, after about a minute the radio
switches itself off. The radio gives its next alarm call on the following day
at the programmed time.
Snooze Function
Pressing the SNOOZE
r
button interrupts the alarm tone for approx. 8 minutes.
For as long as the snooze function is activated the indicator "Zz" blinks in the
display. After these 8 minutes, the alarm tone is repeated. Place the switch
ALARM ON/OFF/AUTO
e
at "OFF" to switch the alarm function off com-
pletely.
Wakening with the alarm tone
When the clock is set correctly, as described above:
1. Place the sound volume controller OFF/BUZZ/VOLUME
o
at "OFF/
BUZZ". A "Click" will be heard.
2. To activate a wake-up call with the alarm tone place the ALARM ON/
OFF/AUTO
e
at "AUTO". The symbol for the alarm function and
"Zz" appear in the display
i
.
The alarm tone sounds at the programmed time. If you do not touch any
other buttons while the alarm is sounding, after about a minute the alarm
tone switches itself off. The radio gives its next alarm call on the following
day at the programmed time.
- 13 -
To Next Page
Loading...