Setting up and connecting
GB
12
KH 2610
Requirements for the set-up location
For safe and faultless operation of the device the set-up location must
fulfi ll the following provisions:
The device must be placed on a fi rm, fl at and level surface.
■
Do not place the device in a hot, wet or very damp environment or ■
in the vicinity of fl ammable materials.
Place the device so that it is not subjected to direct sunlight.
■
Connecting to a computer
System prerequisites
You will need a computer with a vacant USB port and with the
operating system Windows
®
XP, Windows
®
Vista or Windows
®
7
from the Microsoft
®
corporation.
Installation of the drivers and the
ArcSoft PhotoImpression 6 programme
NOTICE
In these operating instructions only the programme sections ►
are described that you will need for scanning your slides
and/or fi lm negatives. You can fi nd further information in the
programme's on-line help.
The illustrations and descriptions refer to the operating system ►
Microsoft® Windows® Vista. The illustration depictions can
diff er, depending on the display settings, with other operating
systems.
To Next Page
Loading...
