20
semble (see Fig. 1).
Releasethexationofthethermostathead
(12) and remove the thermostat head (12).
Adapters for Danfoss
During assembly, be careful not to
jamyourngersbetweenthehalves
of the adapter!
One of the adapters contained in the mate-
rial supplied is required in order to assemble
the thermostat on Danfoss valves. Please re-
fertothegures(2-4)fortheassignmentof
the adapter ring to the corresponding valve.
The bodies of the valves from Danfoss are
provided with longitudinal grooves (13)
around the circumference which ensure a
moresecuretoftheadapterafterbeing
latched on.
NOTE: During assembly, please
pay attention that the spigots inside
To Next Page
Loading...
