Silvercrest SAD 3D 12 A1 - Handling and operation; Initial use; Switching the appliance on;off and setting the colour change and timer functions

■ 12
│
GB
│
IE SAD 3D 12 A1
Handling and operation
Initial use
IMPORTANT
► It is possible that oil drops may cause damage to furniture
surfaces. If necessary, place a cloth under the appliance.
♦ Place the appliance on a stable and level surface.
♦ Remove the glass screenw and the lid1.
♦ Fill the water tank3 with at least 20ml (maximum 100ml)
clean tap water using the provided measuring beaker r. Note
the maximum filling level6, which is marked by a border.
♦ Add 2–4 drops of the desired oil to the water.
♦ Afterwards, place the lid1 and the glass screenw back on
the water tank3.
♦ Connect the mains adaptere to the mains socket.
Switching the appliance on/off and setting
the colour change and timer functions
♦ Press the button0 to switch on the appliance.
Aromatic mist production starts.
♦ Press the
button9 to start the colour change function.
Press
the
button9 again to select the current colour. By pressing
the button9 repeatedly, you can select your favourite
colour or switch off the lighting completely.
♦ Press the
buttonq to start the timer function at 30 minutes
(0.5h). Press the buttonq repeatedly to set the timer function
to 1 hour (1h), 2 hours (2h) or 3 hours (3h) or to switch the timer
function off completely. The green LED shows the set time. If no
LED is lit, the timer function is switched off. The appliance switches
off automatically when the set time has elapsed.
IB_394267_SAD3D12A1_LB8.indb 12 03.09.2021 13:25:32