EasyManua.ls Logo

Silvercrest SAD 3D 12 A1 - Cleaning;Descaling the Appliance; Storage

Silvercrest SAD 3D 12 A1
190 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
14 
GB
IE SAD 3D 12 A1
Cleaning/descaling the appliance
Clean the water tank 3 after each use so as to remove oil re-
sidue as completely as possible. For this, use a soft and slightly
moist cloth. In the case of stubborn stains, place a few drops of
mild detergent on the damp cloth.
NOTICE
Use common retail sunflower oil to remove discolourations
caused by oils from the water container 3.
Should the steam production diminish, the ceramic disk 3
located at the bottom of the water tank 4 must be cleaned.
For this, use a slightly moistened cotton bud.
Clean the surfaces of the appliance with a soft and dry cloth.
To descale the appliance, use a standard commercial liquid de-
scaling agent. Pay heed also to the manufacturer’s instructions
for your descaler.
Fill the water tank 3 to the maximum filling level 6 with
descaler and let it stand until the scale is fully dissolved.
Pour the scale removal away and then clean the water tank 3
with a soft and slightly damp cloth.
Storage
Should you decide to not use the appliance for an extended period,
disconnect it from the mains power supply and store it in a clean
and dry location away from direct sunlight.
IB_394267_SAD3D12A1_LB8.indb 14 03.09.2021 13:25:33

Table of Contents

Related product manuals