GB
│
IE
│
11 ■
SADH 12 C3 / SADH 12 D3
Unpacking
♦ Remove all parts of the appliance and these operating
instructions from the box.
♦ Remove all packaging materials from the appliance.
Electrical connection
IMPORTANT
► Before you connect the appliance to the power supply, check to
ensure that the required input voltage as given on the type plate
tallies with that for the intended power source. To avoid possible
damage to the appliance this data must match.
► Check to ensure that the cable for the power adapter e is not
damaged and that it does not lead over hot surfaces and or
sharp edges, otherwise it could be damaged.
► Ensure that the cable for the power adapter e is not over-taut
or kinked.
♦ Connect the power adapter e to the appliance by inserting the
plug into the plug socket 8 on the underside of the appliance.
To Next Page
Loading...