Silvercrest SADH A1 - Switching off the Product; Cleaning and Care; Descaling

31GB/IE
 Switching off the product
¾ Switching off: Press
11
.
¾ Disconnect the power adaptor
6
from the socket outlet.
¾ Disconnect the cable of the power
adaptor
6
from the plug socket
14
.
¾ Remove the diffusion cone
2
and the
water tank cover
3
.
¾ Empty the product via the pouring
spout
16
. Take note of the pouring
direction arrow
15
on the water tank
5
.
m
ATTENTION! To avoid damage,
do not discard the water through the
ventilation slot
8
.
 Cleaning and care
m
DANGER! Risk of electric
shock! Disconnect the power
adaptor
6
from the socket outlet
before cleaning the product.
Never touch the power adaptor with
moist or wet hands.
Always keep the power adaptor and
supply cord dry.
m
WARNING! Never immerse the
product in water or other liquids.
Never hold the product under running
water.
¾ Do not use any corrosive or abrasive
cleaning agents.
¾ Clean the product with a damp cloth.
If any stubborn stains remain, place
a few drops of mild detergent on the
damp cloth and clean it again.
¾ Clean the dish
9
regularly by using a
slightly moistened cotton bud.
 Descaling
Descale the product if visible deposits
occur or if the steam output is restricted.
¾ Use a standard commercial liquid
descaling agent.
¾ Fill the water tank
5
to the maximum
fill level
4
with descaler.
¾ Wait according to the instructions of
the descaler.