SilverCrest SAS 120 C1
12 - English
Unwind the length of power cord (6) you
need and store the power cord (6) you do
not need in the power cord store (5). Guide
the power cord (6) through the gap in the
device base (7) between the power cord
store (5) and the outside.
Place the supply carriage (10) vertically into
the guide grooves on the food slicer from the
top. Push it into the guide grooves and make
sure that the supply carriage (10) clicks into
place properly.
Place the food holder (4) onto the supply
carriage (10). Now position the catcher plate
(8) below the device base (7) so that it can
catch the sliced food.
Now plug the mains plug into an easily accessible mains socket.
To Next Page
Loading...
Need help?
General
