Silvercrest SAT 1500 B1 - Getting Started and Initial Setup; Charging the Device

English - 19
6. Getting started
` Remove all packaging materials.
6.1. Charging the device
` Remove the sensor unit from the armband,
by pulling it firmly if necessary (see Fig. C).
` Connect the activity tracker to a free USB
port on your PC or laptop (see Fig. B).
` Make sure the USB port contacts on the ac-
tivity tracker match the contacts on the USB
port on your PC or laptop.
The device needs approximately 60 minutes to
charge.
NOTICE!
If the charging control LED does not light up red,
this means the activity tracker is not connected
to the USB port, and cannot be charged.