20 - English
Turn the sensor unit over and check the operat-
ing state of your PC/laptop.
` Use a USB extension cable to make it easier
to charge the activity tracker.
The operating LED goes out as soon as the sen-
sor unit has been fully charged.
` Using the connectors, plug the sensor unit in
the appropriate socket on the armband, as
shown in Figure C.
6.2. Putting the device on
` Place the activity tracker around your wrist
and fasten the armband.
NOTICE!
The activity tracker should not be too tight or too
loose for your wrist.
To Next Page
Loading...
