11GB
z Initial app setup
NOTES:
Screenshots are from Android 10 version or
from iOS 13.3 version.
Older versions may have functional
limitations.
Updating the firmware might result in changes
to the app’s functionality.
Screenshots are for reference only. There
may be slight deviations between iOS and
Android versions.
Preparation
Download the SilverCrest Watch app by
using the QR code on the packaging.
The QR code is also on the sticker on the
display of the product.
Install SilverCrest Watch app.
Switch on Bluetooth function on the mobile
device.
1. Open the app.
2. Read the Privacy Policy.
3. Tap
I agree.
NOTE: The product’s full functions can only
be used when the
I agree option is selected.
4. Follow the app to setup your personal
information (Goals, name, gender, birthday,
weight, height, stride length, etc.).
5. Tap to start pairing the product with the
app.
6. Activate the Bluetooth function of the product:
Touch the touch button
[1].
The last 4 digits of the product’s MAC
address are shown in the display
[2]. This
means that you have to bind the product with
the app first before use.
NOTE: If no product is found after the scan,
scroll down the app screen to refresh. Touch
the touch button
[1] to activate the Bluetooth
function again.
To Next Page
Loading...
