Silvercrest SAT90A1 - Connect Smartwatch; Camera Shutter; System Settings

19GB
z Connect Smartwatch
 Enter Settings and tap on Connect
Smartwatch
.
NOTE: This function only works within
Bluetooth range
and if no activity tracker is
paired with the app.
z Camera Shutter
 Enter Settings and tap on Camera
Shutter
to enter the camera mode on the
product and on your mobile device.
 Tap on the touch button [1] to take a photo,
which will be saved on your mobile device.
 You may also press the photo button on your
mobile device to take a photo. The photo
might then be stored at a different location on
your mobile device.
z System settings
 Open the Settings menu.
 Tap on System Settings.
 You can set the following:
– Display
– Language
– Measurement Units
– 12-hour Format
– Smart Wake Up
– Do Not Disturb
– Health Reminder
– About