SBF 2 B2■ 22
│
GB
│
IE
│
NI
♦ Select the entry SBF 2 B2 from the list of found
devices on your mobile phone and, if required,
enter the code 0000 to connect the two devices.
If the pairing is successful, you will hear a short
beep.
♦ The Bluetooth
®
headset 8 is now in standby
mode and the multifunction button 6 flashes
blue every 5 seconds.
If the Bluetooth
®
headset 8 is being charged
in the USB charger 1, the multifunction button
6 flashes alternately blue and orange
every 2.5 seconds.
NOTE
► If the Bluetooth
®
headset 8 is being
charged in the USB charger 1 during the
pairing attempt, the Bluetooth
®
headset 8
switches off automatically after 15 minutes.
If this happens, you will have to switch the
Bluetooth
®
headset 8 back on before
restarting the pairing process.
IB_339722_SBF2B2_LB6.indb 22 09.04.2020 10:09:09
To Next Page
Loading...
