9
GB
1. Plug the Micro USB connector of the USB
charger cable12 into the socket MICRO
USB8 of the device.
2. Connect the USB-A connector of the USB
charger cable12 e.g. to the USB socket of a
PC or to a USB power unit (not included in
scope of supply). The charging indicator1 is
lit red and goes off when the battery is fully
charged.
7. Operation
7.1 Establish a Bluetooth
connection
NOTES:
• The identification of the device is "SBL44A1".
• After turning it on, the device automatically
tries to reconnect to the last paired device or to
establish a new connection.
• Please observe that the establishment process
of the connection may vary slightly depending
on the device and the software used.
• If no Bluetooth connection can be established
within 8 minutes the device switches off.
• Depending on e.g. the volume, the device may
be used for a period of approx. 5 hours while
the Bluetooth connection is established.
*%B58%OXHWRRWK/DXWVSUHFKHUIP6HLWH'RQQHUVWDJ-DQXDU
To Next Page
Loading...
Need help?
General
