Silvercrest SBL 44 A1

13
GB
7.3 Playing music using the cable
NOTE: if there is a device connected via a cable,
this connection has priority over the Bluetooth con-
nection. A possibly existing Bluetooth connection
will be interrupted. Phone calls can still be made
wireless.
1. Plug the TRS connector of the 3.5 mm stereo
jack cable13 into the headphone socket of
the sound source (e.g. MP3 player, telephone)
and the socket AUX6 on the device.
2. Switch on the sound source.
3. Press the button fII10 for approx. 4 seconds
to switch on the device. An acoustic signal
sounds.
4. Press PLAY on the sound source. The sound is
reproduced via the speakers5.
5. Set the volume on the sound source to the max-
imum level and adjust the volume on the de-
vice using the buttons
‹-
11 /
+
›
9. The
song must be chosen via the sound source.
BB58%OXHWRRWK/DXWVSUHFKHUB%ERRN6HLWH'LHQVWDJ-DQXDU
