EasyManuals Logo

Silvercrest SBLV 20 A1 User Manual

Silvercrest SBLV 20 A1
36 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #13 background imageLoading...
Page #13 background image
SBLV 20 A110 
GB
IE
To end the Bluetooth
®
connection, either deactivate the Bluetooth
®
function
on the playback device or switch the Bluetooth
®
operation on the speaker
off by pressing the
/AUX button and switching to AUX mode. When you
switch to AUX mode, the operating LED
lights up orange.
NOTE
The next time you turn on the device it will automatically connect to the last
Bluetooth
®
playback device connected. If your Bluetooth
®
playback
device does not automatically reconnect to the device, you will have to re-
establish the connection to your Bluetooth
®
playback device manually.
A detailed description of how to do this can be found in the operating
instructions for your Bluetooth
®
playback device.
If you use a smartphone as your Bluetooth
®
playback device, the audio
playback will be paused when there is an incoming call. Acceptance/
termination of the call is carried out via the smartphone. After finishing the
call, the playback will be automatically continued.
Note that while in Bluetooth
®
mode, you can also set the volume via the
Bluetooth
®
playback device.
If the playback sounds distorted, reduce the volume on the Bluetooth
®
playback device.
Connect a playback device via AUX IN
You can connect a wide variety of playback devices to this device, for example
MP3 or CD players. Please refer to the operating instructions of the respective
device. To connect external playback devices, you will need an audio cable (not
included). One end of the cable must have a 3.5 mm jack plug to connect to
the 3.5 mm jack socket
. The type of plug on the other end of the cable will
depend on the audio output of the external device.
CAUTION
Switch off all devices before connecting them with each other and follow
the operating instructions of the devices you want to connect.
Connect the line-out connector of the external playback device (e.g. headphone
socket) via a 3.5mm jack cable to the 3.5 mm AUX IN jack socket
on the
rear of the device.
Move the toggle switch
to the ON position. By default, Bluetooth
®
oper-
ation is activated when you turn on the device and the operating LED
flashes
blue.
Press the
/AUX button to switch to AUX mode. The operating LED lights
up orange.
Switch on the connected playback device and start playback.
Turn off both devices before you disconnect them from each other.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Silvercrest SBLV 20 A1 and is the answer not in the manual?

Silvercrest SBLV 20 A1 Specifications

General IconGeneral
BrandSilvercrest
ModelSBLV 20 A1
CategorySpeakers
LanguageEnglish

Related product manuals