Installing the hands-free appliance in a vehicle
So that the hands-free appliance can function correctly, it is connected to the vehicle
cigar lighter socket or on-board power socket and provided with electricity from
there.
• Ensure that the hands-free appliance engages completely and that the operation
of the vehicle is not negatively influenced. The LED status indicator 6 blinks
twice every 3 seconds and a short high signal tone sounds once. The appliance
is in standby mode.
Note:
It is possible that the cigar lighter only functions when the vehicle ignition is
switched on. In cases of doubt, consult the operating instructions for the
particular vehicle.
Caution:
For vehicles in which the cigar lighter, resp. the vehicle circuit plug, also functions
when the ignition is switched off:
• Use the hands-free appliance only when the motor is running. Otherwise, the
vehicle batteries could become discharged over an extended period of time.
Note:
When you are not using the hands-free equipment remove it from the vehicles
cigarette lighter socket. Store it in a dry, dust free location protected from direct
sunlight.
8
IB_69169_SBTF10B2_GB.qxd 29.09.2011 10:22 Uhr Seite 8
To Next Page
Loading...
Need help?
General
