Note:
Voice dialing is only available with mobile telephones that support this function.
Further information regarding voice dialing is to be found in the operating
instructions for your mobile telephone.
Accepting and ending a call
When you receive a call the LED status display 6 blinks and you hear a call
tone from the hands-free appliance. If the call signal in your mobile phone is swit-
ched off, the ringing tone is nonetheless sounded via the hands-free appliance.
• Press the multi-function button 7 shortly once, to accept the call.
• Press the multi-function button 7 shortly once, to terminate the accepted call.
You can also accept and terminate the call over the mobile telephone.
Automatic call acceptance
If automatic call acceptance is activated in the mobile telephone, it accepts the
incoming call after a determined time period and then passes it on to the
hands-free appliance. Further information regarding automatic call acceptance
is to be found in the operating instructions for your mobile telephone.
Rejection of a call
• Press the multi-function button 7 for 3 seconds to reject an incoming
telephone call.
13
IB_69169_SBTF10B2_GB.qxd 29.09.2011 10:22 Uhr Seite 13
To Next Page
Loading...
Need help?
General
