GB
CY
8
SBTF 10 C2
Switching the hands-free
appliance on and off
Switching on: The appliance is switched off .
Ɣ Press and hold the multi-function button 6 for 3 seconds,
until a short and high signal tone is heard. The LED
status indicator 7 blinks twice every 3 seconds.
Note:
The hands-free set switches on automatically as soon as it
is connected to a power supply.
Switching off : The appliance is in standby mode.
Ɣ Press and hold the multi-function button 6 for 5 seconds,
until a long and deep signal tone is heard. The LED
status indicator 7 extinguishes.
Coupling the hands-free appliance
with a mobile telephone
The hands-free appliance has been especially developed
for mobile telephones that support the Bluetooth
®
Profi le
“Handsfree (HFP) and Headset (HSP)“. Further informa-
tion about Bluetooth
®
radio technology is to be found
in the operating instructions for your mobile telephone.
Before you can use the hands-free appliance, you must
connect it with a compatible mobile telephone (pairing).
Ɣ Check to make sure the mobile telephone is switched on.
Ɣ Programme the mobile telephone so that it searches
for Bluetooth
®
appliances. A detailed description of
how to do this is to be found in the operating instruc-
tions for your mobile telephone.
Ɣ Ensure that the hands-free appliance is correctly set up
and switched off .
Ɣ To switch the device off , press and hold the multi-function
button 6 for about 3 seconds. A long, low signal
tone will be heard and the LED status indicator 7
extinguishes.
To Next Page
Loading...
Need help?
General
