EasyManua.ls Logo

Silvercrest SDM 1500 D3 - Burn Hazards; Operation; Dry Indoor Room Use; Extension Cord Guidelines

Silvercrest SDM 1500 D3
71 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
10 GB
The filling aperture must not be
open during use.
Burn hazards
m DANGER! Risk of burns!
Do not touch hot surfaces and
beware of escaping steam. Hold
the product by its handle only.
Steam is very hot. Never put your
hands in front of the steam jet.
Operation
Only use the product in dry
indoor rooms.
The plug must be removed from
the wall socket before the water
tank is filled with water.
The use of extension cords is not
recommended. If the use of an
extension cord is necessary, it
must be designed for a current
flow of at least 10 A. Lay cords
in such a way that they may not
be tripped over or otherwise
damaged.
Do not operate the product with
wet hands or while standing on a
wet floor. Do not touch the power
plug with wet hands.
Stop using the product if the anti-
kink protection on the power cord
is damaged!
Cleaning and storage
Always turn off the product
before disconnecting it from the
power supply.
Do not pull the power plug out
of the wall socket by the power
cord. Do not wrap the power
cord around the product.
Protect the product, its power
cord and power plug against
dust, direct sunlight, dripping and
splashing water.
Store the product in a cool, dry
place, protected from moisture
and out of the reach of children.

Table of Contents

Related product manuals