Silvercrest SDM 1500 D3 - Assembly; Handle Folding; Steam Foot Attachment; Microfiber Cloth Installation

11 GB
 Protect the product against heat.
Do not place the product close to
open flames or heat sources such
as stoves or heating appliances.
 Before first use
 Remove all packaging materials. Check if all
parts are complete.
 Assembly
 Unfolding/folding the handle
Handle
1
Unfolding
Unfold the handle until it clicks in
place.
Folding
Press the folding button
25
. Then,
fold the handle downwards.
 Attaching the steam foot
 Align the locking hole of the steam foot
16
with
the release lever
17
.
 Push in the steam foot
16
until it locks in place.
NOTE:
 The angle of the steam foot
16
can be adjusted:
Steam foot
16
Release steam
foot
Gently step on the steam foot. Pull
the main body backwards.
Lock steam
foot
Pull the main body forward until the
steam foot locks in place.
 Do not force the steam foot
16
onto the main
unit. Always use both hands while connecting the
parts.
Microfiber cloth installation
(for cleaning floors)
 Place the microfiber cloth
14
on the steam
foot
16
. Align the hook-and-loop straps of the
microfiber cloth with the hooks on the steam foot.
Carpet glider installation
(for cleaning carpets)
 Attach the microfiber cloth
14
. Place the carpet
glider
15
onto the steam foot
16
until it locks in
place.
 Using as a handheld steamer
 Press the eject button
24
. Pull out the handheld
unit
22
.
Extension hose installation
The extension hose
2
is useful for hard-to-reach
areas.
 Installing the extension hose
2
: Align the locking
hole with the release lever
17
of the handheld
unit
22
.
 Push in the extension hose
2
until it locks in
place.
Extension nozzle installation
 Align the locking hole of the extension nozzle
13
with the release lever
17
of the handheld
unit
22
/extension hose
2
.
 Push in the extension nozzle
13
until it locks in
place.