EasyManua.ls Logo

Silvercrest SDV-702 - Powering On and Off Procedures

Silvercrest SDV-702
47 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Client: Lidl
Project: SDV-702 New Plug
Language: EN
Date: 31.03.2008
Version: 07
Page: 18 (of 47 pages)
Barcode: 400 5037 10 00 1 00266
Done: KV
18
Done: KV
10.4 Insert disc
Press OPEN (23) in the direction
of the arrow to open the disc
compartment.
Insert the desired disc with the
label up. 8 cm and 12 cm discs
can be inserted.
Press the disc down in the center,
until clicking into position.
Close the compartment by
pressing the cover down until it
locks into place.
10.5 Turn DVD player on
Slide the ON/OFF switch (10) to ON position. The power indicator
(9) lights up orange. The inserted disc is loaded. READ is shown
on the display. The disc starts automatically. Depending on the
type of disc, the following actions will take place:
DVD Usually an initial scene will play and afterwards the
main DVD menu is displayed.
Video CD A folder and a track overview are displayed. The
following video files can be played: MPEG1 (DAT),
MPEG2 (DAT, VOB, MPG), MPEG4 (AVI, MP4).
Audio CD The music is played and, if available, a track
overview is displayed.
MP3/WMA
CD
A folder and a track overview are displayed.
Foto CD A folder and a file overview are displayed. Only
JPEG files are displayed.
10.6 Remove disc and turn off DVD player
Press STOP (47) twice to stop disc playback.
Press OPEN (23) in the direction of the arrow to open the disc
compartment and remove the disc.