9 GB
m WARNING! Risk of electric
shock! Never use a damaged
product. Disconnect the product
from the power supply and
contact your retailer if it is
damaged.
¾ The product is not to be used if
it has been dropped, if there are
visible signs of damage.
¾ The product is powered at all
times while it is connected to the
power supply.
¾ Before connecting the product
to the power supply, check that
the voltage and current rating
corresponds with the power
supply details shown on the
product’s rating label.
¾ Regularly check the power plug
and the power cord for damages.
If the power cord is damaged,
it must be replaced by the
manufacturer, its service agent or
similarly qualified persons in order
to avoid a hazard.
¾ Protect the power cord against
damages. Do not let it hang over
sharp edges, do not squeeze or
bend it. Keep the power cord
away from hot surfaces and open
flames.
Operation
¾ The product must not be left
unattended while it is connected
to the supply mains.
¾ Do not move the product while it
is in operation.
¾ Do not place the product on hot
plates (gas, electric, coal cooking
range etc.). Operate the product
on a level, stable, clean, heat-
resistant and dry surface.
¾ Do not cover the product while it
is in use or shortly after use, when
it is still hot.
¾ Make sure that the power cord
is not pinched by the plates or
touches the rim of the plates.
To Next Page
Loading...
