Silvercrest SED 3.7 G3 - Cleaning and Care Instructions; Cleaning Safety Precautions; Cleaning the Epilator Head and Housing

SED 3.7 G3
GB
│
IE
│
NI
│
CY
│
15 ■
Cleaning and Care
RISK OF ELECTRIC SHOCK
► Before cleaning, disconnect the appliance from the mains power
adapter  and the mains power adapter  from the main power
supply.
WARNING! PROPERTY DAMAGE!
► NEVER submerse the appliance in water or other liquids!
■ After every use clean the epilator head  with the supplied
cleaning brush 3to remove loose hairs.
■ Disinfect the epilator head  regularly by spraying and
cleaning it with disinfectant spray.
■ To thoroughly clean the epilator head  you can remove it
from the appliance:
― Press the two restraint fixtures  together and at the same
time pull the epilator head  upwards.
― Clean the epilator head  under running water and then allow
it to dry.
― Place the epilator head  back onto the appliance. The epila-
tor head  must audibly engage.
■ Clean the appliance housing and the mains power adapter 
with a moist cloth. If required, use some mild detergent on the
cloth. Ensure that the appliance is completely dry before the
next use.