Silvercrest SFA 4.1 E1 - Storing the Device When Not in Use; Restore Factory Settings

SilverCrest SFA 4.1 E1
98 - English
9.13 Storing the device when not in use
If the device is not going to be used for a long period of time, you should recharge the
battery on a regular basis. This helps maintain battery performance. Keep the device in a
dry, clean and cool place.
9.14 Restore factory settings
You can restore the hands-free kit to its factory settings. Doing so will delete the list of connected devices in the hands-
free kit.
Proceed as follows:
 With the hands-free kit switched on, hold down the standby button (8) and the - button (5) simultaneously for
about five seconds until two beeps sound.
 Press the standby button (8) to switch the hands-free kit off and complete the procedure.
The next time you switch on the hands-free kit, it starts directly in pairing mode and the mute button (3) alternates
between flashing blue and orange.