What to do if my Silvercrest Juicer motor runs slow?
If the motor of your Silvercrest Juicer stops or runs slowly and irregularly, immediately switch off the appliance and disconnect the power plug. The filter is likely blocked. Remove the blockage as described in the "Juicing" chapter.
Why does juice spray from the Silvercrest Juicer outlet?
If the Silvercrest Juicer sprays juice from the outlet, it could be due to several reasons. You might be working too fast, so try slowing down. Avoid pressing too hard with the pusher when adding more product. Ensure you've selected speed setting I on the On/Off switch. Also, the filter or juice outlet might be blocked, so clean them thoroughly.
How to fix a Silvercrest SFE 450 B16 that does not function?
If your Silvercrest Juicer isn't working, first, ensure the power plug is properly connected to a power socket. Next, check that the appliance is switched on using the On/Off switch. Finally, make sure the clasps are securely fastened.
What to do if juice wells out of my Silvercrest SFE 450 B16 Juicer?
If juice is leaking between the housing lid and the juice container of your Silvercrest Juicer, it could be because you are working too fast; try slowing down the juicing process. Additionally, the filter or juice outlet might be blocked, so clean them. Ensure that you have selected speed setting I on the On/Off switch.
Why is the vegetable mash moist in my Silvercrest Juicer?
If the vegetable mash is too moist and you're not getting enough juice from your Silvercrest Juicer, try working a little slower. Also, the filter might be blocked, so clean it thoroughly.
General| Power | 450 W |
|---|---|
| Speed Settings | 2 |
| Voltage | 220-240 V |
| Frequency | 50/60 Hz |
| Feed Chute Diameter | 75 mm |
| Cord Length | 1.2 m |
| Juice Container Capacity | 1 L |
| Material | Plastic |
| Color | Silver |
General safety measures for electrical appliances, avoiding injury and damage.
To Next Page
