GB
│
IE
│
NI
│
11 ■
Inserting/replacing the batteries
♦ Open the battery compartment 8 on the underside
of the wireless mouse.
♦ Insert 2 x 1.5 V AA batteries into the battery com-
partment 8 (observe correct polarity). First place
one battery in the lower compartment and then the
second battery in the higher compartment. Ensure
that the plastic strip is positioned under the batteries,
this will make future battery exchanges easier.
♦ Close the battery compartment 8.
CAUTION
► Always use batteries from the same manufacturer
and of the same type. Always replace both batteries
at the same time.
Connecting the nano-USB receiver
♦ Remove any other mouse that is connected to your
computer and then restart the computer.
♦ Remove the nano-USB receiver 0 from the storage
compartment 9 on the bottom of the wireless
mouse.
♦ Connect the nano-USB receiver 0 to a free USB-port
on your computer while it is running.
To Next Page
Loading...
Need help?
General
