Silvercrest SFPM 600 A1 - Page 25

23
GB
9. Use the dial11 to select the desired
speed setting.
10. When the process is completed, switch
the dial11 to 0 and pull out the mains
plug10.
11. Turn the lid3 with the food pusher1
slightly in an anticlockwise direction
and remove it.
12. Turn the working container8 slightly
anticlockwise and remove it.
13. Pull the axle9 downwards from the
working container8 or remove it from
the base unit12.
14. Remove the adapter7 together with the
whisking disc17 upwards and remove
the prepared food from the working
container8.
15. Clean all of the accessories that have
been used immediately if possible.
Using the grater and
cutting disc
Application area:
The grater and cutting disc16 is suitable for
grating and cutting vegetables, fruit, pota-
toes and cheese. Both sides can be used.
On the one side for grating and on the other
side for cutting slices.
The tool you want to use must be on top.
Processing table:
Required accessories:
-Axle9
- Working container8
- Grater and cutting disc16
-Lid3 with food pusher1
Work steps:
1. Figure B: place the axle9 on the base
unit12.
2. Figure C: position the working con-
tainer8 in position a on the base
unit12. Turn the working container
clockwise slightly until it audibly clicks
into position b.
3. Position the grater and cutting disc16
on the axle9 in such a way that the
tool with which you want to work is po-
sitioned on top.
4. Figure F: place the lid3 on the work-
ing container8. Turn the lid slightly in a
clockwise direction until it audibly clicks
into place.
5. Connect the mains plug10 to a wall
socket.
6. Fill the prepared ingredients into the
food chute2.
7. Turn the dial11 to position 1 and press
the ingredients down with the food
pusher1 using light, even pressure. In-
gredients with a long shape, such as
carrots, courgettes, cucumbers can be
pressed downward without a food
pusher if they protrude from the top of
the food chute2.
8. Stop (dial11 in the 0
position) before
all of the ingredients in the food
chute2 are processed so that you can
fill in more ingredients.
9. Process all ingredients portion by por-
tion. Empty the working container8
from time to time if it is filled up to the
MAX marking.
10. When the process is completed, switch
the dial11 to 0 and pull out the mains
plug10.
11. Turn the lid3 with the food pusher1
slightly in an anticlockwise direction
and remove it.
12. Hold the grater and cutting disc16 in
the middle and lift it out of the working
container8.
Ingredi-
ents
max.
quantity
Processing
Carrots 300 g
Grating/Cutting: set-
ting
1
max. 5 min.
Leeks 300 g
Cutting: setting
1
max. 5 min.
__373069_2104_Food Prozessor_Short_OS.book Seite 23 Donnerstag, 2. September 2021 9:57 09