37 GB/IE
electrician. The RCD must be installed by an
electrician.
Do not use the product if the product, the
USB-Type-A to C cable
10
and the power
adapter (not included in delivery) shows
damage or if the product has been dropped.
Do not plug in the power adapter (not included
in delivery) until the USB-Type-C connector
11
is connected to the product.
Only plug the power adapter (not included in
delivery) into a properly installed, easily ac-
cessible mains socket with a voltage that cor-
responds to the information on the type plate.
The mains socket must also be easily accessible
after the product has been plugged in.
Ensure the USB-Type-A to C cable
10
will not
be damaged by sharp edges or hot surfaces.
Ensure the USB-Type-A to C cable
10
will not
be pinched or crushed.
Always unplug the product by the power
adapter (not included in delivery).
Unplug the power adapter from the mains
socket after after charging, if a fault occurs,
To Next Page
Loading...
