Silvercrest SFR 3 A1 - Page 13

SFR 3 A1
■ 10
│
GB
│
IE
│
NI
Removing / replacing the spacer
♦ To attach the spacer 5, first place it on the top of the
cutting head and then press it firmly. Make sure that
the recess of the spacer 5 engages in the lock on the
device:
1
2
♦ To remove, first pull off the spacer 5 at the bottom of
the lock and then remove it.
IB_449407_SFR3A1_LB6.indb 10 19.09.2023 11:32:17